1.5 ID High-Temp Fuel Hose Fuel Resistant for Auto Systems

Hot engine? Spilled gasoline? Fuming repair bills? You're not alone. 68% of fleet managers report fuel system failures costing $8,400 average downtime per incident. Leaky fuel hoses create fire hazards and destroy engines. Your current hose failed because it can't handle modern biofuels. That ends today.

Don't Compromise: Specialized Fuel Hose for Fuel Injection Systems

Fuel injection demands precision. Standard hoses swell under pressure, messing with your fuel trims. Our ultra-low permeability design maintains exact fuel pressure. Installation? Easier than you think.

• Snap-fit connectors - install in 90 seconds
• Bending radius - 30% tighter turns
• Vapor lock prevention - reinforced inner liner

Big truck? Our 2 inch fuel filler hose handles 60 GPM flow rates without collapse.

Your Custom Fuel Line Solutions

One size doesn't fit all. We create bespoke solutions:

• Cut-to-length assemblies with bonded ends
• Marine-grade options with saltwater resistance
• Colors and labeling for easy identification

Need special fittings? Tell us your requirements. We'll engineer it.

Where Premium Fuel Hoses Perform

From drag strips to diesel generators. Our products excel in:

• High-performance turbo systems
• Agricultural equipment fueling stations
• Emergency generator fuel systems

Industrial pumps? Our 2 inch fuel filler hose handles 1,000-gallon diesel transfers.

(1.5 id fuel hose)

FAQS on 1.5 id fuel hose

Q: What does 1.5 ID mean for fuel hoses?

A: The "1.5 ID" refers to the inner diameter measurement in inches (1.5 inches). This standardized sizing ensures compatibility with fittings and fuel systems requiring specific flow rates. Always confirm ID specifications match your vehicle or equipment needs.

Q: Why choose fuel resistance and high temperature fuel hoses?

A: These hoses resist chemical degradation from modern ethanol/gasoline blends and withstand engine bay temperatures exceeding 250°F. This prevents cracks, leaks, and failures under extreme conditions. They are essential for performance and safety.

Q: Can standard fuel hose be used for fuel injection systems?

A: No—fuel injection systems require specialized hoses rated for higher pressures (often 50-100+ PSI). Standard hoses may swell or burst under injection pressure. Always use SAE J30R9 or equivalent fuel-injection-rated hose.

Q: Where are 2 inch fuel filler hoses typically used?

A: These large-diameter hoses connect fuel tanks to filler necks in trucks, boats, RVs, and industrial equipment. Their size enables rapid fueling, while reinforced construction prevents kinking or collapse during refueling operations.

Q: Is a 1.5 ID fuel hose suitable for diesel applications?

A: Yes, if labeled SAE J30R7 or higher for diesel resistance. Verify compatibility with ultra-low-sulfur diesel (ULSD) and biodiesel blends. Combine with high-temperature ratings if exposed to turbo/exhaust heat sources.