Heavy Duty Four-layer Steel Wire Spiral Reinforced Hydraulic Hose SAE100R9+R10+R12

Inner Tube : oil resistant synthetic rubber - delivering hydraulic oils for long-term use.

Reinforcement Layer: four layers of high-tensile steel wire spiral or braided reinforced - its used to withstand high pressure.

Cover : oil resistant and weather resistant synthetic rubber - it can work at tough condition and complex environment.

Temperature : -40℃ (-104℉) to +100℃ (+212 ℉)

CONTACT NOW PDF DOWNLOAD

Product introduction

Description

Data Table

Application Fields

Product features

Hydraulic hose SAE 100 R9/R10/R12 steel wire spiraled hydraulic hose consists of three layers. Inner tube, reinforcement and outer layer. Its used to deliver hydraulic fluid, petroleum based hydraulic fluid, hydraulic oil, mineral oil, gasoline, fuel oil, lubricating oil, emulsion, glycol solution, air brake, gas and water. Its mainly used in high pressure working conditions.

High pressure hose steel wire reinforced hydraulic rubber hose can be used in mine hydraulic support, oil field development, suitable for engineering construction, lifting and transportation, etc.

The hydraulic hose has three layers of different material structure. The inner tube is made from oil resistant synthetic rubber, therefore it can’t be corroded by the petroleum base fluid and liquid. The reinforcement part is consist with four layers of high tensile and high strength spiraled steel wire, and wind in alternating directions, therefore the hose can withstand internal and external extremely high pressure. The cover is made from high quality rubber and to play the protective function, so the rubber hose could resistant to abrasion, corrosion, air oxidation, extreme weather, ozone, aging, sunlight and cutting, also with longer service life.

SAE 100 R9/R10/R12

Metric Size	Inch Size	Dash Size	I.D		W.D		O.D		Max W.P		Min B.P	Min B.R	W.T
Metric Size	Inch Size	Dash Size	Standard(mm)		Standard(mm)		Standard(mm)		Max W.P		Min B.P	Min B.R	W.T
mm	Inches	Dash	Min	Max	Min	Max	Min	Max	Mpa	psi	Mpa	mm	Kg/m
10	3/8	6	9.3	10.1	16.6	17.8	19.5	21	28	4060	112	125	0.7
12.5	1/2	8	12.3	13.5	19.9	21.5	23	24.6	28	4060	112	180	0.88
16	5/8	10	15.5	16.7	23.8	25.4	26.5	28.2	28	4060	112	200	1.06
19	3/4	12	18.6	19.8	26.9	28.4	29.9	31.5	28	4060	112	240	1.38
25	1	16	25	26.4	34.1	35.7	36.8	39.2	28	4060	112	300	1.96
31.8	1-1/4	20	31.4	33	42.7	45.1	45.4	48.6	21	3045	84	420	2.61
38	1-1/2	24	37.7	39.3	49.2	51.6	51.9	55	17.5	2538	70	500	3.05
51	2	32	50.8	52	62.5	64.8	65.1	68.3	17.5	2538	70	640	4.5